- Why do records play at 33 rpm?
- Can you fix a warped vinyl?
- Can a record player play any size vinyl?
- Why do records play at different speeds?
- How often should you replace a vinyl needle?
- What speed do vinyl records play at?
- Can you skip tracks on vinyl?
- Is it worth listening to vinyl?
- Does vinyl actually sound better?
- Why is vinyl better than CD?
- Which is not a speed to play vinyl records at?
- Does playing vinyl damage it?
- What happens if you play a 45 record at 33?
- What is the most common vinyl size?
- How do you tell if vinyl is 33 or 45?
- Do 45s sound better than 33s?
- Can a needle damage vinyl?
- How long does a vinyl last?
Why do records play at 33 rpm?
The original acceptance of 33 1/3 by RCA in 1931 was a compromise between sound quality – the slower the rotation, the poorer the sounds quality – and quantity of recording time.
The original microgroove could hold 23 minutes of recorded music.
This was a huge increase from the 5 minutes per side of the 78..
Can you fix a warped vinyl?
Warped vinyl can lead to a wobbly sounding rendition of your favorite song. Fortunately, warped records can often be fixed, so you can be back to rockin’ and rollin’ in no time. You’ll need two sheets of glass larger than your album, but small enough to fit in your oven. Heavier or thicker glass tends to work best.
Can a record player play any size vinyl?
All record players do not play every single size of vinyl record. All record players will play the two most common sizes of vinyl record, those being 12-inch and 7-inch, but it is far less likely they will be able to play a 10-inch record.
Why do records play at different speeds?
The slower a record turns, the worse the audio sounds. Due to this, in order to provide the best sound possible, the record needs to turn faster (higher RPM). However, when a record turns faster the amount of information it can hold on a record is reduced thus having a shorter playback time.
How often should you replace a vinyl needle?
Most manufacturers recommend changing your stylus at around 1000 hours of record playing time. So if you’re using your turntable for an hour or so per day on average, ideally you should be changing the stylus every couple of years.
What speed do vinyl records play at?
Vinyl records come in three speeds: 33 1/3 rpm (often just called a “33”), 45 rpm and 78 rpm.
Can you skip tracks on vinyl?
A very common question that comes up frequently is this one: “Can I skip tracks on vinyl?” The plain and simple answer to that is: Yes. You can skip tracks on vinyl records. Anyone can do it.
Is it worth listening to vinyl?
If you feel drawn to vinyl, then absolutely. It’s mainly worth it if you’re going to listen to stuff on vinyl. There’s no point in making the investment if it’s going to sit and collect dust. If you feel drawn to vinyl, then absolutely.
Does vinyl actually sound better?
Vinyl is far more high-quality. No audio data is lost when pressing a record. It sounds just as great as the producer or band intended. There’s another, far superior reason why vinyl is better than lossy digital formats.
Why is vinyl better than CD?
While vinyl records, in theory, directly encode a smooth audio wave, CDs sample that audio wave at various points and then collate those samples. … The sampling rate for CDs is 44.1kHz, meaning that CD recordings sample the master recording 44,100 times a second, and can capture frequencies as high as 20 kHz.
Which is not a speed to play vinyl records at?
Vinyl records are produced to be played at one of three speeds: 33 1/3 RPM, 45 RPM, and 78 RPM. You will almost never deal with 78 RPM records, so don’t worry about that. Most full-size 12-inch records will be 33 1/3 RPM, though some — mainly EPs and maxi-singles — will be at 45 RPM.
Does playing vinyl damage it?
As for wear-induced noise, most of that comes from playing records with a worn-out or damaged stylus (aka needle) that’s literally gouging the grooves with each play. Any decent cartridge will play records without damaging the groove. … A force setting that’s too high or too low can accelerate record wear and noise.
What happens if you play a 45 record at 33?
The tip mass of the stylus will probably erase the highest frequencies from the record if you play it back at 45 instead of 33. The tip mass of the stylus will probably erase the highest frequencies from the record if you play it back at 45 instead of 33.
What is the most common vinyl size?
The most common sizes are seven, 10, and 12 inches in diameter, but size isn’t the only way to identify what kind of vinyl record you have….Vinyl Record Formats78 RPM Records History: … 331⁄3 RPM: … 45 RPM:Jul 19, 2018
How do you tell if vinyl is 33 or 45?
12″ records that are albums (>20 minutes per side) are 33, 12″ records that are singles may be 33 if they are from the US or 45 if they are from Europe. 10″ records are usually 33, but there may be 45 as well. It is printed on the label.
Do 45s sound better than 33s?
Since 45s travel faster than 33s, more waveform definition can be squeezed into the format, which takes up more room. More bumps and grooves created in pressing a 45 means better audio quality. … Again, it is similar to MP3 sound quality issues in the digital world.
Can a needle damage vinyl?
Over time, your stylus may deteriorate, bend, and even crack. Note of warning: a damaged or worn out stylus can seriously damage your record collection. … If you’re already hearing the symptoms below, please don’t use your record player until you have replaced your stylus!
How long does a vinyl last?
Your vinyl records can last anywhere from a year or two and up to well over 100 years.