Question: How Do You Tell If Vinyl Is 33 Or 45?

Are 45 rpm records worth anything?

Rock and roll and R&B 45s with the cardboard sleeves are worth at least $20, with many being worth more than $200.

First pressings of albums have more value than second, third, or subsequent pressings.

They are referred to as the “originals” that were purchased when the record first hit the charts..

Is it worth listening to vinyl?

If you feel drawn to vinyl, then absolutely. It’s mainly worth it if you’re going to listen to stuff on vinyl. There’s no point in making the investment if it’s going to sit and collect dust. If you feel drawn to vinyl, then absolutely.

Why do records play at 33 rpm?

The original acceptance of 33 1/3 by RCA in 1931 was a compromise between sound quality – the slower the rotation, the poorer the sounds quality – and quantity of recording time. The original microgroove could hold 23 minutes of recorded music. This was a huge increase from the 5 minutes per side of the 78.

What size record is a 33?

Chances are, the records you’d like to listen to are full-size 12-inch records, spinning at 33 1/3 RPM, or 7-inch singles, spinning at 45 RPM. Often, EPs and maxi-singles are produced on 12-inch disks that also rotate at 45 RPM.

Does vinyl really sound better?

Vinyl sounds better than MP3s ever could. Most of the music is broadcast in some lossy format, where details are missed, and the overall quality is reduced. … There’s another, far superior reason why vinyl is better than lossy digital formats.

How long is a 33 rpm record?

44 minutesA standard 12-inch 33 RPM vinyl record can have a playtime of roughly 22 minutes per side for a total of 44 minutes.

Are 33 rpm records worth anything?

Rare and Valuable LPs (33 RPM) Some sell for $1000 or more. “Most collected artists” records have the highest values. Most “Fans” LPs made after 1970 sell for $10 or more and some made before 1970 sell for $100+.

What is a 10 inch vinyl?

10 inch vinyl records are great for shorter length (EP) albums. At 33 rpm they hold around 12-15 minutes per side. At 45 rpm they hold around 9-12 minutes per side. 33 rpm is the most common speed for 10 inch records.

What are the different vinyl sizes?

Vinyl records typically come in three speeds: 33, 45 and 78 rotations per minute (RPM). If you’re like most record lovers you’ve probably flipped speeds from time to time in order to hear your music faster or slower than normal.

Are most vinyl 33 or 45?

Vinyl records are produced to be played at one of three speeds: 33 1/3 RPM, 45 RPM, and 78 RPM. You will almost never deal with 78 RPM records, so don’t worry about that. Most full-size 12-inch records will be 33 1/3 RPM, though some — mainly EPs and maxi-singles — will be at 45 RPM.

What happens if you play a 33 record at 45?

Playing it on 45 rpm won’t damage the record, but it won’t sound right. No harm at all. … The sound quality of vinyl records eventually degrades from the mechanical force of the stylus in the groove. It seems unlikely that playing a record at a different speed will hasten this process.

Does 45 rpm sound better?

Since 45s travel faster than 33s, more waveform definition can be squeezed into the format, which takes up more room. More bumps and grooves created in pressing a 45 means better audio quality. … Again, it is similar to MP3 sound quality issues in the digital world.

Can you skip tracks on vinyl?

A very common question that comes up frequently is this one: “Can I skip tracks on vinyl?” The plain and simple answer to that is: Yes. You can skip tracks on vinyl records. Anyone can do it.

Does scratching damage vinyl?

Over time with excessive scratching, the stylus will cause what is referred to as “record burn” to a vinyl record.

Does the size of the vinyl matter?

No. All record players don’t use the same size vinyl. Basically, there are three different-sized vinyl records you will find on the market. These vinyl records rotate on the turntable at different speeds which are measured in revolutions per minute (RPM).

Does playing a record at the wrong speed damage it?

Playing vinyl records at the wrong speed does not do any damage. The audio will not sound as intended, but there will be no lasting extra damage if the standard RPM speeds are used.

How do I know what size my vinyl record is?

The most common sizes are seven, 10, and 12 inches in diameter, but size isn’t the only way to identify what kind of vinyl record you have. A better way to group these discs and tell them apart is the speed (in revolutions per minute, or RPM) at which they spin while playing on a turntable.

What is standard vinyl size?

Vinyl records also come in three standard diameters: 7-inch, 10-inch and 12-inch. The larger the diameter, the longer the groove can be and the greater the possible playing times, dependent upon rotational speed. (The actual playing time is a ratio between speed and the length of the grooves.)